 |  |  | |  |
| 5/16 Bolt Size USS Flat Washer Our Price: $0.10 | Our Price: $0.75 Sale Price: $0.15 Savings: $0.60 | Our Price: $0.15
| ||
| 3/8" inside diameter, 7/8" outside diameter, Steel Washer | For Right Hand threads | #8-32 x 1/2" Polar Cover Bolt | ||
| | ||||
 | |  | |  |
| 10-32 x 1/2" Button Head Socket Cap Screw Our Price: $0.15 | #10-24 x 5/16" Socket Cap Screw Our Price: $0.15 | Our Price: $0.20 | ||
| Stainless Steel Button Socket Cap Screw | Replacement screw for Polar Ramps on a Polar Ramp Holder | 9/16" ID, 3/4" OD, .3/32" Thick Buna-N O-Ring | ||
| | ||||
 | |  | |  |
| Our Price: $0.20 | Our Price: $0.25
| 1/4-28 x 1" Button Head Socket Cap Screw Our Price: $0.25 | ||
| Hex Jam Lock Nut with Nylon Insert | Shims for use besides Flyweights, Arms, rollers. .020" thick, #10 hole. Sold each. | Used on the Dual Pinch Hub and Sprocket/Rotor Hub | ||
| | ||||
 | |  | |  |
| Our Price: $0.25 | Factory Walbro / WMS Fuel Pump cover Our Price: $0.25 | Our Price: $0.25 | ||
| 1/4-20x5/8 Socket Head Cap Screw | Replacement Walbro / WMS Fuel Pump cover - Black | #10-32x5/16 Set Screw | ||
| | ||||
 | |  | |  |
| Our Price: $0.25 | Our Price: $0.25 | 1/4-20 UNC Hex Socket Cap Screw Our Price: $0.25 | ||
| Zinc-Plated Hex Jam Lock Nut | Mikuni choke knob. | 1/4-20" Alloy Steel, Fully Threaded, Hex Socket | ||
| | ||||
 | |  | |  |
| 6-32x 7/8 Alloy Steel Hex Socket Screw Our Price: $0.25 | Our Price: $0.40
| Our Price: $0.49 | ||
| Alloy Steel, Black Oxide, Fully Threaded, Hex Socket | 4" wide Black Anti Slip, peel and stick. Sold by the inch. | Stainless Hex drive | ||
| | ||||
 | |  | |  |
| Spark Plug / Coil Wire ends - Pair Our Price: $0.50 | Our Price: $0.50 | 10/24 x 1 /34" Socket head Cap Screw Our Price: $0.50 | ||
| Spark plug / Coil wire ends - Sold as a pair. Carry a couple spares! | Partially Threaded, Grade 2 Steel, 9/16" Hex Head Cap Screw | hardware for the adjustable coil bracket | ||
| | ||||
 | |  | |  |
| Our Price: $0.50 | Our Price: $0.65
| Our Price: $0.75
| ||
| Soft, High Performance Noise Blocker | Fuel Line Hose Clamps - Sold Each! | Throttle Cable Clamp with screw | ||
| | ||||
 | |  | |  |
| Our Price: $0.89 | Our Price: $0.99
| Our Price: $0.99 | ||
| Right Hand threads | Use this washer to stop gouging that starter nut into your expensive Flywheel | Snap rings for piston pin. Sold as Pair. | ||
| | ||||
 | |  | |  |
| Our Price: $0.99 | Our Price: $0.99 | 28mm Bowl Screw without Lockwasher Our Price: $0.99 | ||
| Mikuni Jet Needle E-Ring (clip) | Replacement nut for the Mychron Jackshaft Sensor | Float Bowl Screw | ||
| | ||||
 | |  | |  |
| 5/16 - 18 x 2 1/4" Grade 8 Hex Flange Bolt Our Price: $0.99 | 33mm Bowl Screw without Lockwasher Our Price: $0.99 | Regina Racing Decals / Stickers Our Price: $1.00 | ||
| Center Pull Motorplate hardware | Float Bowl Screw | Regina Racing Decal (pair)- Show em' you run the best....perfect size for your Junior! | ||
| | ||||
 | |  | |  |
| #35 Standard Chain Master Link Our Price: $1.00
| Our Price: $4.99 Sale Price: $1.00 Savings: $3.99 | Our Price: $1.20
| ||
| #35 Standard Chain Master Link - fits #35 Standard Chain | A/Pump Lever for 40mm and 36mm carburetors | Choose from Blue, Purple, Red, Yellow, Clear or Orange! | ||
| | ||||
 | |  | |  |
| Our Price: $1.99 Sale Price: $1.25 Savings: $0.74 | Starter / Choke Assembly O-Ring Our Price: $1.29
| Our Price: $1.38
| ||
| Quick Fastener Mounting Bracket | Replacement O-Ring for the Choke Assembly on a 33mm, 36mm or 40mm Carb. | Accelerator Pump Nozzle O-ring | ||
| | ||||
 | |  | |  |
| Our Price: $1.39
| Our Price: $1.39
| Our Price: $1.42
| ||
| Needle Clip Washer | Dzus Reinforcement Plate - 2 Rivet style. | Mikuni Jet Needle E-Ring | ||
| | ||||
 | |  | |  |
| Our Price: $1.49
| Shockwave / Shocker Spider Roller Bearing Our Price: $1.49 | Our Price: $1.59
| ||
| Fits 42mm, 33mm, 36mm & 40mm Carbs | Replacement Bearing for the Shockwave and Shocker Spider roller kits | Factory flywheel key....easy on the expensive aluminum flywheels! | ||
| | ||||
 | |  | |  |
| Our Price: $1.59
| Our Price: $1.59
| Our Price: $1.69 | ||
| Belt Guard bolts - Set of Four Button Head bolts. 5/16 Fine thread. | External Axle Snap Rings - Choose from various sizes. | Replacement float pin for the 18mm, 28mm and 42mm Float | ||
| | ||||
 | |  | |  |
| Our Price: $1.89
| 33mm Accelerator Pump Lever Bolt Our Price: $1.99
| 42mm Fuel Joint Retainer Plate Our Price: $1.99 | ||
| Nylon 1/4" barbed ends | 33mm Accelartor Pump Lever Bolt | 42mm Fuel Joint Retainer Plate | ||
| | ||||
 | |  | |  |
| Our Price: $1.99
| 1/4" x 1/2" Hex Socket Shoulder Screw Our Price: $1.99 | 1/4" x 1" Hex Socket Shoulder Screw Our Price: $1.99 | ||
| O-ring for the 36mm, 40mm or 42mm Drain Plugs | #10-24 UNC Hex Socket Should Screw | Socket Head Bolt for Shut Off Kit | ||
| | ||||
 | |  | |  |
| Our Price: $1.99 | Dzus Round Reinforcement Plate Our Price: $1.99 | Our Price: $1.99 | ||
| Needle Valve O-Ring | Dzus Reinforcement Plate -4 Rivet style. | Mikuni Standard Nozzle Pump | ||
| | ||||
 | |  | |  |
| 36mm/40mm Throttle Valve Lever Plate Our Price: $1.99 | Our Price: $1.99 | Our Price: $2.00
| ||
| Mikuni Throttle Valve Lever Plate | Factory Starter/Choke Lever | 28mm Bowl Screw - sold in a set of 4 | ||
| | ||||
